This post will teach a way to Open Router Ports, so please take a look and for support, just dial Belkin Router Customer Service Number: 1 888 306 5155.
At the point when a PC program asks for an open to connect to the Internet, you need to forward it to your PC utilizing your router's setup page. Router setup shifts from brand to mark, and even from model to demonstrate, however, port sending works comparatively on a wide range of sorts of routers.
Beginning
To achieve your router's setup page, you have to know its IP address. You'll additionally need to know your PC's neighborhood IP address to forward ports. In the event that you don't have the foggiest idea about these numbers as of now, discover them utilizing ipconfig. (Press Windows-R and run cmd), sort ipconfig and press Enter. Perused the line marked "IPv4 Address" for your PC's IP address, and the "Default Gateway" line for your router's IP. Ipconfig yields a considerable measure of information, so in the event that you don't see these lines, look up.
IP addresses close by, sign into your router by writing the number from the Default Gateway line into your Web program's address bar. Enter the router's authoritative client name and secret word when prompted.
Belkin Routers
Step 1: Click Applications and Gaming on the menu bar.
Step 2: Open the Port Range Forward tab, in the event that it isn't as of now open. On the principal purge line, fill in the scope of ports you need to be sent with the Start and End boxes. Pick the convention — pick Both on the off chance that you aren't sure — and after that enter the last area of your PC's IP in the IP Address field. Check Enable and click Save Settings. The Application box is a discretionary mark for your reference.
DD-WRT (Including Buffalo Routers)
Step 1: Click NAT/QoS on the fundamental menu. Not at all like most routers, DD-WRT just prompts you to sign in after you click an alternative on the menu, so sign into the proceeding.
Step 2: Click Add to make another clear line on the Port Forwarding tab. Enter a similar port number you need to forward in both the Port From and Port To boxes. Pick the convention, enter your PC's full IP address and check Enable. Include a mark in the Application box for your own particular reference, and after that snap Apply Settings to wrap up.
Belkin Routers
Step 1: Click Forwarding to open the Virtual Servers page, which is Belkin's expression for port sending. Click Add New to begin another forward.
Step 2: Enter the port to forward in the Service Port field, or enter a scope of ports utilizing a hyphen. Leave the Internal Port field clear. Fill in your PC's full IP address and set the convention. Click Save to wrap up.