This content is describing a procedure to Turn a Router Into a Proxy Server and if you need any help use Belkin Router customer service number: 1 888 306 5155.

Home Network with access to the Internet is springing up all over. The straightforwardness with which these Networks are installed and set up is extraordinary. Be that as it may, an association is generally a two-way road. In the event that you can get to some PC on the Internet, some PC on the Internet can get to you, or you’re PC. Security along these lines has turned out to be vital. Companies spend a considerable measure on securing their Network. What would you be able to do to secure your home Network? Setting up an intermediary server is one choice. An intermediary server goes about as an entryway to your Network, an approach to quit interfering associations, and it is anything but difficult to set up.

Step 1:

Remove your Router from its new bundle and associate the radio wire to it. Connect to the power supply and turn on the Router. Append one end of a Network cable to your Internet modem and the other to the port in the back of the Router marked "Web." Attach a moment cable from the back of your PC to any accessible port on the back of the Router.

Step 2:

Open the web program on your PC and utilizing the guidelines gave by the producer of the Router sign into it and get to the settings. Explore to the "Remote Management" segment and ensure that "Turn Remote Management On" is not checked. Explore to the "WAN Setup" area and ensure that "Default DMZ Server" is not checked.

Step 3:

Explore to the "Attached Devices" segment and record the IP address of the PC to be gotten to on your Network.

Step 4:

Explore to the "Port Forwarding" segment. Put a check label by "Port Forwarding" to enable the administration. From the "Name" drop down list select the administration you need, for example, HTTP or FTP. In the server IP address sort the delivery of the PC to be gotten to on your Network. Click "Include Service."

Step 5:

Reboot your Router for the new settings to produce results.

Rate0